Skip to content

AC Installation in Burbank, CA

Serving Burbank and nearby cities. Tell us about the job and we’ll call you back to confirm the details.

Tell us what’s going on

Prefer to talk? (669) 201-5255

The short answer

A new AC in Burbank should be sized from a load calculation for your specific home, because inland valley heat puts more demand on cooling equipment than coastal LA does. Liberty HVAC installs central AC and heat pump systems in Burbank and confirms which rebates your utility offers before quoting them.

Burbank sits on the valley side of the hills, about 10 miles north of our Los Angeles base, and its summers run noticeably hotter than neighborhoods near the coast. When an air conditioner here is undersized, oversized, or poorly installed, you feel it on the hottest afternoons and in the electric bill. Liberty HVAC installs central air conditioners and heat pump systems for homes across Burbank, including ZIP codes 91501, 91502, 91504, 91505, and 91506. This page covers how we size a system for Burbank's heat, what the installation involves, and what to check about rebates and regulations before you buy.

Sizing an AC for Burbank's Valley Heat

Los Angeles has a Mediterranean climate with dry summers and mild winters, but the region's temperatures vary widely. Inland neighborhoods and valleys run much hotter in summer than areas near the ocean, and fall Santa Ana winds can bring hot, dry spells after summer seems to be over. A Burbank home needs a system that keeps up during those stretches without running nonstop.

Bigger is not automatically better. An oversized unit cools the air quickly, shuts off, and starts again, which wears parts faster and can leave rooms feeling uneven. An undersized unit runs for hours and still falls behind on hot afternoons. We size equipment with a load calculation that accounts for your home's square footage, insulation, window area and orientation, ceiling height, and how much afternoon sun the house gets. Rules of thumb based only on square footage often miss the mark in hotter inland areas.

What a Burbank AC Installation Includes

Replacing an air conditioner involves more than swapping one box for another. The outdoor unit, indoor coil, ductwork, thermostat, and electrical supply all have to work together. Here is what we cover on a typical installation:

  • An in-home visit to look at your current system, ductwork, electrical panel, and the space where the equipment will go
  • A load calculation to choose the right capacity for your home
  • Matching the outdoor unit with a compatible indoor coil and air handler or furnace
  • Inspection of accessible ductwork for leaks, crushed sections, or poor connections that would waste cooling
  • Placement of the outdoor unit with clearance for airflow and service access
  • Refrigerant line, drain, and electrical connections completed to manufacturer specifications
  • Thermostat setup and a walkthrough so you know how to run the system and change filters
  • Removal of the old equipment

Central AC or a Heat Pump?

Many Burbank homeowners replacing an older air conditioner also consider a heat pump, which cools in summer and heats in winter with one outdoor unit. Because winters here are mild, a heat pump can handle heating for many homes, which may let you retire an aging gas furnace.

That decision is also affected by regional rules. South Coast AQMD Rule 1111 limits NOx emissions from natural-gas fan-type central furnaces sold and installed in the Los Angeles region, and the district has been amending it toward zero-emission requirements. If your AC replacement also involves the furnace, check the current rule before you commit, because the district sets and revises the compliance dates. We can walk through how that affects your options.

One change to note: the federal Energy Efficient Home Improvement Credit (25C) applied to qualifying heat pumps placed in service before December 31, 2025. It is not available for new installations after that date, so don't count on it when budgeting a system today.

Rebates Depend on Who Serves Your Home

Which equipment rebates you can get depends on the electric utility that serves your address. Many homes outside the City of Los Angeles are served by a utility other than LADWP, so the LADWP heat pump rebate program will not apply to every home we work on. For LADWP residential customers, the Consumer Rebate Program offers rebates on qualifying heat pump HVAC systems, with the amount based on the unit's SEER2 and HSPF2 ratings, and the application is filed after purchase and installation, within 12 months of purchase.

Since Burbank sits outside the City of Los Angeles, we confirm the current offer for your address before quoting any rebate, so you are not planning around money that is not available.

Serving Burbank and Nearby Communities

Burbank is in Los Angeles County, and we install air conditioning systems throughout the city. We also work in West Hollywood, Beverly Hills, Culver City, Vernon, and Santa Monica. Climate differs across these areas, so we size each system for its own location instead of using one approach for every home. If you are planning an AC installation in Burbank, contact Liberty HVAC to schedule an in-home assessment.

More services in Burbank

Related

What to expect

How a visit goes

  1. Diagnose First

    We test the system and pinpoint the cause before suggesting parts or replacement, so you know what you're paying to fix and why.

  2. Clear Options

    When there's more than one way to solve a problem, we lay out each option, what it involves, and the tradeoffs, then let you decide.

  3. Current Rules and Rebates

    Local equipment rules and utility rebates change. We check the current requirements and the offers available for your address before planning an installation.

FAQ

Common questions

How long does an AC installation take in a Burbank home?

A straightforward replacement using existing ductwork is often finished in a day. Jobs that involve new ductwork, electrical upgrades, or switching to a heat pump can take longer. We will give you a time estimate after the in-home visit.

Can I just replace my old AC with the same size unit?

Not always. The original unit may have been sized incorrectly, or your home may have changed since then through added insulation, new windows, or an addition. A load calculation tells us what capacity your home actually needs.

Is a heat pump a good fit for Burbank's climate?

For many homes, yes. Burbank's winters are mild enough that a heat pump can handle heating while also cooling through hot valley summers. We look at your home and current heating system before recommending one.

Can I still claim the federal tax credit for a new heat pump?

No. The federal 25C credit covered qualifying heat pumps placed in service before December 31, 2025. It does not apply to installations after that date.

Will I get a utility rebate on my new system?

That depends on which utility serves your address. Many homes outside the City of Los Angeles are not LADWP customers, so we confirm what is currently offered for your home before including any rebate in a quote.

Do I need to replace my furnace when I replace my AC?

Not necessarily, but the indoor equipment has to be compatible with the new outdoor unit. If your furnace is also due for replacement, check the current South Coast AQMD Rule 1111 requirements, which affect gas furnaces sold and installed in the region.

Tell Us What's Going On With Your System

Whether your AC stopped cooling, your furnace won't start, or you're thinking about switching to a heat pump, contact Liberty HVAC Services. We'll ask a few questions, look at the system, and explain your options before any work begins.

Call (669) 201-5255 Request Service