Skip to content

Furnace Repair in Santa Monica, CA

Serving Santa Monica and nearby cities. Tell us about the job and we’ll call you back to confirm the details.

Tell us what’s going on

Prefer to talk? (669) 201-5255

The short answer

Liberty HVAC Services repairs gas furnaces in Santa Monica homes, diagnosing the actual fault before recommending any part. Because coastal furnaces often sit unused for long stretches, many problems come from dirty sensors, worn igniters, and clogged filters rather than major failures.

Santa Monica sits close to the ocean, where winters are mild and a furnace can go weeks without running. Light use doesn't make a furnace trouble-free. A system that sits idle for most of the year collects dust on its burners and sensors, and problems often show up on the first chilly evening when you finally turn up the thermostat. Liberty HVAC Services repairs gas furnaces in homes throughout Santa Monica, across ZIP codes 90401, 90402, 90403, 90404, and 90405, about 8 miles west of our Los Angeles base. Below is what tends to go wrong, how a repair visit works, and what to consider if replacement comes up.

Why Furnaces in Santa Monica Act Up

Los Angeles has a Mediterranean climate with mild winters, and areas near the coast stay cooler in summer and milder overall than the inland valleys. For Santa Monica homeowners, that usually means the furnace runs only on cool mornings and evenings for part of the year. Long idle periods let dust settle on the flame sensor and burners, filters get forgotten, and small electrical issues go unnoticed until heat is actually needed.

Many furnaces here are installed in hall closets, attics, or garages, where access is tight and airflow around the unit can be limited. We look at the installation as well as the furnace itself, because a blocked return or crushed duct can cause symptoms that look like a failed part.

  • Furnace clicks or tries to light, then shuts off
  • Blower runs but the air coming out is cool
  • Furnace short-cycles, turning on and off every few minutes
  • Burning-dust smell that lingers well past the first few minutes of the season
  • Loud rattling, scraping, or booming when the burners light
  • Thermostat calls for heat and nothing happens

How a Furnace Repair Visit Works

We start by asking what you've noticed: when the problem started, whether it happens every cycle, and any sounds or smells. Then we check the furnace in order, from thermostat signal and power to ignition, flame, airflow, and venting, so we find the cause instead of guessing at parts.

Common fixes include cleaning or replacing a flame sensor, replacing a hot surface igniter, clearing a clogged condensate line on high-efficiency units, replacing a failed inducer or blower motor, and correcting a tripped limit switch caused by restricted airflow. Before we replace anything, we explain what failed, why, and what your options are. If the furnace has a deeper problem, such as a cracked heat exchanger, we show you what we found and talk through next steps.

Safety Comes First

A gas furnace burns fuel inside your home, so some symptoms call for shutting it off right away. If you smell gas, leave the house and call your gas utility from outside. If a carbon monoxide alarm sounds, get everyone outdoors and call 911. Once the home is safe, we can inspect the furnace and venting.

During every repair we check the flue and vent connections, look for signs of flame rollout or scorching, and confirm the furnace is drafting correctly. Make sure your home has working CO alarms, especially near bedrooms.

Repair or Replace? What to Know in the LA Region

Most furnaces we see in Santa Monica can be repaired, often because they've run so few hours. When a furnace is aging, needs a major part, or has a safety issue, replacement may make more sense. If you're weighing that decision, know that South Coast AQMD Rule 1111 limits NOx emissions from natural-gas fan-type central furnaces sold and installed in the Los Angeles region, and the district has been amending it toward zero-emission requirements. The district sets and revises compliance dates, so check the current rule before planning a replacement.

Some homeowners consider a heat pump instead, which handles both heating and cooling. Rebate options depend on which utility serves your address. LADWP offers rebates on qualifying heat pumps for its residential customers, but many homes outside the City of Los Angeles are served by Southern California Edison instead, so we confirm the current offer for your address before quoting it. The federal 25C tax credit covered heat pumps placed in service before December 31, 2025, and it is not available for new installations after that date.

Serving Santa Monica and Nearby Westside Communities

Along with Santa Monica, we repair furnaces in nearby Culver City, Beverly Hills, West Hollywood, El Segundo, and Manhattan Beach. If you're unsure whether we cover your street, reach out and we'll let you know.

More services in Santa Monica

Related

What to expect

How a visit goes

  1. Diagnose First

    We test the system and pinpoint the cause before suggesting parts or replacement, so you know what you're paying to fix and why.

  2. Clear Options

    When there's more than one way to solve a problem, we lay out each option, what it involves, and the tradeoffs, then let you decide.

  3. Current Rules and Rebates

    Local equipment rules and utility rebates change. We check the current requirements and the offers available for your address before planning an installation.

FAQ

Common questions

Why does my furnace smell like burning when I first turn it on?

Dust settles on the heat exchanger and burners during months of non-use and burns off when the furnace starts. A smell that fades within a short time is normal. If it persists, smells electrical, or smells like gas, turn the furnace off and have it checked.

My furnace lights and then shuts off. What causes that?

A dirty flame sensor is one of the most common causes. The furnace lights, can't confirm the flame, and shuts off for safety. Cleaning or replacing the sensor often fixes it, but airflow and venting problems can cause similar behavior, so we check those too.

How often should I change my furnace filter in Santa Monica?

Check it at the start of the heating season and every one to three months while the system is in use, including when the same blower runs for air conditioning. A clogged filter restricts airflow and can make the furnace overheat and shut down.

Is a furnace that rarely runs worth maintaining?

Yes. Low use means less wear, but idle furnaces still develop dirty sensors, dry or weak components, and blocked drains. A tune-up before the cool season catches these issues before you need heat.

Do I have to replace my gas furnace with a heat pump?

Not for a repair. Rules on new furnace installations in the LA region are set by South Coast AQMD under Rule 1111 and have been changing, so if you're planning a replacement, check the current requirements first. We can walk you through furnace and heat pump options.

Are there rebates for heat pumps in Santa Monica?

It depends on your utility. LADWP offers rebates on qualifying heat pumps for its customers, while many homes outside the City of Los Angeles are served by Southern California Edison. We confirm what's currently available for your address before quoting any rebate.

Tell Us What's Going On With Your System

Whether your AC stopped cooling, your furnace won't start, or you're thinking about switching to a heat pump, contact Liberty HVAC Services. We'll ask a few questions, look at the system, and explain your options before any work begins.

Call (669) 201-5255 Request Service