Skip to content

Heating Repair in Manhattan Beach, CA

Serving Manhattan Beach and nearby cities. Tell us about the job and we’ll call you back to confirm the details.

Tell us what’s going on

Prefer to talk? (669) 201-5255

The short answer

Liberty HVAC Services repairs furnaces, heat pumps, and wall heaters for homes in Manhattan Beach (90266). We find the cause, explain it plainly before any work starts, and tell you honestly if a repair no longer makes sense.

Manhattan Beach homes don't need heat very often, and that can cause problems. A heating system that sits idle from spring through fall can start up in December with a dusty burner, a weak igniter, or a thermostat that has lost its settings. Liberty HVAC Services repairs furnaces, heat pumps, and wall heaters for homes in the 90266 ZIP code, about 11 miles south of our Los Angeles base. We find out why your heat isn't working, explain what we found in plain terms, and fix it so your house stays comfortable on cool, damp coastal evenings.

Why Heating Systems Act Up Near the Coast

Los Angeles has a Mediterranean climate with mild winters, and neighborhoods near the ocean stay cooler and steadier than inland valleys. In Manhattan Beach, a heater may run only on chilly mornings and nights for a few months a year. During the long idle stretches, dust settles on burners and sensors. Moist marine air can also be hard on metal parts and electrical connections, especially on equipment in garages, side yards, or attics.

Because these systems run so little, small problems often go unnoticed until the first cold week, when many households call at once. A check before the season can catch many of these issues early.

Heating Problems We Repair

Most repair calls start with one of a handful of symptoms. Tell us what you're seeing, hearing, or smelling, and we'll start there.

  • Furnace blows cool or room-temperature air
  • Burners light, then shut off after a few seconds
  • Igniter or pilot that won't light
  • Blower that runs nonstop or won't come on
  • Burning-dust smell that doesn't fade after the first few minutes
  • Rattling, banging, or squealing from the furnace or ductwork
  • Heat pump stuck in defrost, short cycling, or not switching from cooling to heating
  • Thermostat that doesn't respond or reads the wrong temperature
  • Some rooms warm while others stay cold

How a Repair Visit Works

We start by asking how the problem began. Then we check the thermostat, power, and filter, because a clogged filter or a switched-off unit causes more no-heat calls than most people expect. From there we test the furnace's ignition sequence, flame sensor, safety switches, blower motor, and control board. On a heat pump, we check the reversing valve, the defrost controls, and the refrigerant side of the system.

Before any work begins, we explain what failed and what the repair involves. If a part has to be ordered, we tell you and leave the system in a safe condition in the meantime. On gas equipment, we also check the venting and look for signs of a cracked heat exchanger or poor combustion. Those are safety problems, not just comfort problems.

When Repair Stops Making Sense

Sometimes an older furnace isn't worth another major part. If that's the case, we'll say so and walk you through your options without pressure.

Replacing a furnace in this region comes with specific rules. South Coast AQMD Rule 1111 limits nitrogen oxide emissions from natural-gas central furnaces sold and installed in the Los Angeles area, and the district has been amending the rule toward zero-emission requirements. The district sets and revises the compliance dates, so check the current rule before planning a furnace replacement. We take it into account when we discuss next steps.

A heat pump is one alternative. Equipment rebates depend on which utility serves your address. Many homes outside the City of Los Angeles are served by Southern California Edison rather than LADWP, so we confirm the current offer for your home before we include it in a quote. The federal Energy Efficient Home Improvement Credit covered qualifying heat pumps placed in service before December 31, 2025. It is not available for new installations.

Before You Call: Quick Checks

We work throughout Manhattan Beach and in nearby El Segundo, Hawthorne, Inglewood, Culver City, and Santa Monica. Whether your furnace is in a hallway closet or the attic, or you have a ducted heat pump, a few simple checks can sometimes restore heat or speed up the visit:

  • Make sure the thermostat is set to Heat and the set point is above room temperature
  • Replace the filter if it looks gray or clogged
  • Confirm the furnace service switch and the circuit breaker are on
  • Replace the thermostat batteries if the display is blank or dim
  • If you smell gas, leave the house right away and contact your gas utility from outside

More services in Manhattan Beach

Related

What to expect

How a visit goes

  1. Diagnose First

    We test the system and pinpoint the cause before suggesting parts or replacement, so you know what you're paying to fix and why.

  2. Clear Options

    When there's more than one way to solve a problem, we lay out each option, what it involves, and the tradeoffs, then let you decide.

  3. Current Rules and Rebates

    Local equipment rules and utility rebates change. We check the current requirements and the offers available for your address before planning an installation.

FAQ

Common questions

Why does my furnace smell like burning when I first turn it on?

Dust that settled on the burners and heat exchanger during the off-season burns off when the heat comes on. The smell should fade within a short time. If it lingers, smells electrical, or comes back every time the heat runs, turn the system off and have it inspected.

Do homes in Manhattan Beach really need heating repair?

Yes. Winters are mild near the coast, but cool, damp evenings are common, and many homes still rely on a furnace or heat pump. Systems that run rarely can develop problems from dust, moisture, and parts that sit unused for months.

Can you repair heat pumps as well as gas furnaces?

Yes. We diagnose and repair gas furnaces, heat pumps, and wall heaters, including problems with defrost cycles, reversing valves, and thermostats that don't switch between heating and cooling.

Should I repair my old furnace or replace it?

It depends on the furnace's condition, which part failed, and whether there are any safety concerns. We explain what we find and give you an honest opinion. If you're leaning toward replacement, keep in mind that local air district rules affect which gas furnaces can be installed, so check the current requirements first.

Are there rebates for switching to a heat pump in Manhattan Beach?

Rebates depend on the utility that serves your address, and many homes outside the City of Los Angeles are served by Southern California Edison rather than LADWP. We confirm the current offer for your home before quoting it. The federal 25C tax credit is no longer available for new heat pump installations.

What areas near Manhattan Beach do you serve?

Besides Manhattan Beach, we serve El Segundo, Hawthorne, Inglewood, Culver City, and Santa Monica, along with the wider Los Angeles area.

Tell Us What's Going On With Your System

Whether your AC stopped cooling, your furnace won't start, or you're thinking about switching to a heat pump, contact Liberty HVAC Services. We'll ask a few questions, look at the system, and explain your options before any work begins.

Call (669) 201-5255 Request Service